Cisco Ethernet Switch

Description

This connector discovers the enclosure Cisco Ethernet switches as well as the various environment sensors (temperatures, fans, power supplies, etc.). It relies on the SNMP protocol.

Connector ID: CiscoEthernetSwitch

This connector supersedes:

GenericSwitchEnclosure

Target

Typical platform: Cisco

Operating system: Network Device

Prerequisites

Leverages: Cisco SNMP Agent (ciscoMgmt)

Technology and protocols: SNMP

Examples

CLI

hws HOSTNAME -t network -f CiscoEthernetSwitch --snmp v2c --community public

hws-config.yaml

hosts:
- host:
    hostname: <HOSTNAME> # Change with actual host name
    type: network
  selectedConnectors: [ CiscoEthernetSwitch ] # Optional, to load only this connector
  snmp:
    version: v1 # Read documentation for v2 and v3
    community: public # or probably something more secure

Connector Activation Criteria

The Cisco Ethernet Switch connector will be automatically activated, and its status will be reported as OK if all the below criteria are met:

An SNMP Get-Next on the OID 1.3.6.1.4.1.9.9.13.1.1 must return a value in the same subtree

Metrics

Type	Collected Metrics	Specific Attributes (Labels)
Enclosure	`hw.status{hw.type="enclosure",state="present"}`	`model` `serial_number` `type` `vendor`
Fan	`hw.status{hw.type="fan",state="ok\|degraded\|failed"}` `hw.status{hw.type="fan",state="present"}`
Network Card, FC Port	`hw.status{hw.type="network",state="present"}`	`physical_address`
Power Supply	`hw.status{hw.type="power_supply",state="ok\|degraded\|failed"}` `hw.status{hw.type="power_supply",state="present"}`
Temperature Sensor	`hw.status{hw.type="temperature",state="ok\|degraded\|failed"}` `hw.status{hw.type="temperature",state="present"}` `hw.temperature`
Voltage Sensor	`hw.status{hw.type="voltage",state="ok\|degraded\|failed"}` `hw.status{hw.type="voltage",state="present"}` `hw.voltage`

Search Results for {{siteSearch | truncate:'50'}}

No results.