Back to the list of connectors

Fujitsu-Siemens Serverview

Description

This connector enables hardware monitoring for Fujitsu-Siemens PRIMERGY servers through the Fujitsu-Siemens Serverview Agent.

Connector file name: MS_HW_ServerviewNT.hdf

This connector is superseded by:

This connector supersedes:

Target

Typical platform: Fujitsu-Siemens PRIMERGY

Operating systems: Microsoft Windows, Linux

Prerequisites

Leverages: Fujitsu-Siemens Serveview Agent

Technology and protocols: SNMP

Connector Activation Criteria

The Fujitsu-Siemens Serverview connector will be automatically activated, and its status will be reported as OK if all the below criteria are met:

  • An SNMP Get-Next on the OID 1.3.6.1.4.1.231.2.10.2 must return a value in the same subtree

Monitors

Object Type Collected Parameters Discovered Properties
Enclosure (MS_HW_ENCLOSURE)
  • Intrusion Status
  • Model
  • Serial Number
  • Type
  • Vendor
Processor (MS_HW_CPU)
  • Status
  • Additional Information 1
  • Maximum Speed
  • Model
  • Vendor
Fan (MS_HW_FAN)
  • Speed
  • Status
  • Additional Information 1
  • Fan Type/Location
Memory Module (MS_HW_MEMORY)
  • Error Count
  • Status
  • Additional Information 1
  • Size
  • Type
Power Supply (MS_HW_POWERSUPPLY)
  • Status
  • Power Supply Type
Temperature Sensor (MS_HW_TEMPERATURE)
  • Temperature
  • Alarm Threshold
  • Sensor Type/Location
  • Warning Threshold
Voltage Sensor (MS_HW_VOLTAGE)
  • Voltage
  • Lower Threshold
  • Upper Threshold
  • Voltage Type
Keywords:
hardware hdf patrol connectors
No results.