Back to the list of connectors

Nvidia-Smi

Description

This connector provides hardware information about most Nvidia GPUs. (Clocking).

Connector file name: MS_HW_NvidiaSmi.hdf

Target

Typical platform: Any system with Nvidia GPUs

Operating systems: Microsoft Windows, Linux

Prerequisites

Leverages: NVIDIA drivers with NVIDIA-SMI support.

Technology and protocols: System Commands

Connector Activation Criteria

The Nvidia-Smi connector will be automatically activated, and its status will be reported as OK if all the below criteria are met:

  • The command below succeeds on the monitored host
    • Command: nvidia-smi
    • Output contains: Driver Version (regex)

Monitors

Object Type Collected Parameters Discovered Properties
Enclosure (MS_HW_ENCLOSURE)
    Fan (MS_HW_FAN)
    • Speed Percent
    • Fan Type/Location
    • Speed Percent Alarm Threshold
    • Speed Percent Warning Threshold
    GPU (MS_HW_GPU)
    • Decoder Used Time Percent
    • Encoder Used Time Percent
    • Memory Utilization
    • Power Consumption
    • Received Bytes Rate
    • Transmitted Bytes Rate
    • Used Time Percent
    • Additional Information 1
    • Additional Information 2
    • Driver Version
    • Firmware Version
    • Model
    • Serial Number
    • Size
    • Vendor
    Temperature Sensor (MS_HW_TEMPERATURE)
    • Temperature
    • Alarm Threshold
    • Sensor Type/Location
    • Warning Threshold
    Voltage Sensor (MS_HW_VOLTAGE)
    • Voltage
    • Voltage Type
    Keywords:
    hardware hdf patrol connectors
    No results.