Back to the list of connectors

Juniper Netscreen (SNMP)

Description

This connector discovers the enclosure, fans, power supplies, temperatures, etc. of Juniper Netscreen Network Switches.

Connector file name: MS_HW_NetscreenChassis.hdf

Target

Typical platform: Netscreen

Operating system: Network Device

Prerequisites

Leverages: Juniper SNMP Agent (NETSCREEN-CHASSIS-MIB)

Technology and protocols: SNMP

Connector Activation Criteria

The Juniper Netscreen (SNMP) connector will be automatically activated, and its status will be reported as OK if all the below criteria are met:

  • An SNMP Get-Next on the OID 1.3.6.1.4.1.3224.21.1 must return a value in the same subtree

Monitors

Object Type Collected Parameters Discovered Properties
Enclosure (MS_HW_ENCLOSURE)
  • Model
  • Type
  • Vendor
Battery (MS_HW_BATTERY)
  • Status
    Fan (MS_HW_FAN)
    • Status
      Other Device (MS_HW_OTHERDEVICE)
      • Status
      • Additional Information 1
      Power Supply (MS_HW_POWERSUPPLY)
      • Status
        Temperature Sensor (MS_HW_TEMPERATURE)
        • Temperature
        • Alarm Threshold
        • Warning Threshold
        Keywords:
        hardware hdf patrol connectors
        No results.