Back to the list of connectors

Juniper Switch

Description

This connector discovers the enclosure, ports, fans, power supplies, port modules, etc. of Juniper Network Switches.

Connector file name: MS_HW_Juniper.hdf

This connector supersedes:

Target

Typical platform: Juniper Network Switch

Operating system: Network Device

Prerequisites

Leverages: Juniper SNMP Agent (JUNIPER-MIB)

Technology and protocols: SNMP

Connector Activation Criteria

The Juniper Switch connector will be automatically activated, and its status will be reported as OK if all the below criteria are met:

  • An SNMP Get-Next on the OID 1.3.6.1.2.1.2.2.1 must return a value in the same subtree
  • An SNMP Get-Next on the OID 1.3.6.1.4.1.2636.3.1.15.1 must return a value in the same subtree

Monitors

Object Type Collected Parameters Discovered Properties
Enclosure (MS_HW_ENCLOSURE)
  • Additional Information 1
  • BIOS Version
  • Model
  • Serial Number
  • Type
  • Vendor
Blade (MS_HW_BLADE)
  • Status
  • Additional Information 1
  • Additional Information 2
  • Additional Information 3
  • Blade Model
  • Serial Number
Fan (MS_HW_FAN)
  • Status
  • Additional Information 1
  • Additional Information 2
  • Additional Information 3
Network Card, FC Port (MS_HW_NETWORK)
  • Bandwidth Utilization
  • Error Percent
  • Link Speed
  • Link Status
  • Received Bytes Rate
  • Received Packets Rate
  • Status
  • Transmitted Bytes Rate
  • Transmitted Packets Rate
  • Device Type
  • Physical Address
  • Physical Address Type
Other Device (MS_HW_OTHERDEVICE)
  • Status
  • Additional Information 1
  • Additional Information 2
  • Additional Information 3
  • Device Type
Power Supply (MS_HW_POWERSUPPLY)
  • Status
  • Additional Information 1
  • Additional Information 2
  • Additional Information 3
Keywords:
hardware hdf patrol connectors
No results.