Back to the list of connectors

IBM FlashSystem 700/800

Description

This connector discovers the enclosure(s) and the disks of IBM FlashSystem 700/800s as well as various environment sensors (temperatures, fans, power supplies). It relies on the SNMP protocol.

Connector file name: MS_HW_IBMFlash800.hdf

Target

Typical platform: IBM FlashSystem

Operating system: Storage System

Prerequisites

Leverages: IBM FlashSystem 700/800 SNMP Agent

Technology and protocols: SNMP

This connector is not available for the local host (it is applicable to remote hosts only).

Connector Activation Criteria

The IBM FlashSystem 700/800 connector will be automatically activated, and its status will be reported as OK if all the below criteria are met:

  • An SNMP Get-Next on the OID 1.3.6.1.4.1.8378.10.1 must return a value in the same subtree

Monitors

Object Type Collected Parameters Discovered Properties
Enclosure (MS_HW_ENCLOSURE)
  • Status
  • Additional Information 1
  • Model
  • Type
Battery (MS_HW_BATTERY)
  • Status
    Fan (MS_HW_FAN)
    • Speed
    • Speed Percent
    • Status
      Network Card, FC Port (MS_HW_NETWORK)
      • Link Speed
      • Link Status
      • Physical Address
      • Physical Address Type
      Physical Disk (MS_HW_PHYSICALDISK)
      • Status
      • Size
      Power Supply (MS_HW_POWERSUPPLY)
      • Status
        Temperature Sensor (MS_HW_TEMPERATURE)
        • Status
        • Temperature
          Voltage Sensor (MS_HW_VOLTAGE)
          • Status
            Keywords:
            hardware hdf patrol connectors
            No results.