Back to the list of connectors

Huawei Servers - Management Card

Description

This connector enables hardware monitoring for Huawei iMana through Huawei iMana Management Card using SNMP.

Connector file name: MS_HW_HuaweiiMana.hdf

This connector supersedes:

Target

Typical platform: Huawei

Operating system: Out-of-Band

Prerequisites

Leverages: Huawei iMana or iBMC Management Card

Technology and protocols: SNMP

This connector is not available for the local host (it is applicable to remote hosts only).

Connector Activation Criteria

The Huawei Servers - Management Card connector will be automatically activated, and its status will be reported as OK if all the below criteria are met:

  • An SNMP Get-Next on the OID 1.3.6.1.4.1.2011.2.235.1.1.15.50 must return a value in the same subtree

Monitors

Object Type Collected Parameters Discovered Properties
Enclosure (MS_HW_ENCLOSURE)
  • Power Consumption
  • Status
  • Model
  • Serial Number
  • Type
  • Vendor
Processor (MS_HW_CPU)
  • Status
  • Maximum Speed
  • Model
  • Vendor
Fan (MS_HW_FAN)
  • Speed
  • Status
    Memory Module (MS_HW_MEMORY)
    • Status
    • Additional Information 1
    • Size
    • Vendor
    Other Device (MS_HW_OTHERDEVICE)
    • Status
    • Device Type
    Physical Disk (MS_HW_PHYSICALDISK)
    • Status
      Power Supply (MS_HW_POWERSUPPLY)
      • Status
      • Additional Information 1
      • Additional Information 2
      Temperature Sensor (MS_HW_TEMPERATURE)
      • Temperature
      • Alarm Threshold
      • Warning Threshold
      Keywords:
      hardware hdf patrol connectors
      No results.