Back to the list of connectors

Hitachi HDS USP/VSP (SNMP)

Description

This connector discovers the overall (global) status of Hitachi USP/VSP's processors, CSW, cache, SM, power supplies, batteries, fans, physical disks and environment sensors.

Connector file name: MS_HW_HitachiVSPSNMP.hdf

This connector is superseded by:

This connector supersedes:

Target

Typical platforms: Hitachi USP, Hitachi VSP

Operating system: Storage System

Prerequisites

Leverages: Hitachi SNMP Agent

Technology and protocols: SNMP

Connector Activation Criteria

The Hitachi HDS USP/VSP (SNMP) connector will be automatically activated, and its status will be reported as OK if all the below criteria are met:

  • An SNMP Get-Next on the OID 1.3.6.1.4.1.116.5.11.4.1.1.6.1 must return a value in the same subtree

Monitors

Object Type Collected Parameters Discovered Properties
Enclosure (MS_HW_ENCLOSURE)
  • BIOS Version
  • Model
  • Serial Number
  • Type
  • Vendor
Battery (MS_HW_BATTERY)
  • Status
  • Type
Processor (MS_HW_CPU)
  • Status
  • Model
Fan (MS_HW_FAN)
  • Status
  • Fan Type/Location
Memory Module (MS_HW_MEMORY)
  • Status
  • Type
Other Device (MS_HW_OTHERDEVICE)
  • Status
  • Device Type
Physical Disk (MS_HW_PHYSICALDISK)
  • Status
  • Additional Information 1
Power Supply (MS_HW_POWERSUPPLY)
  • Status
  • Power Supply Type
Temperature Sensor (MS_HW_TEMPERATURE)
  • Status
  • Sensor Type/Location
Keywords:
hardware hdf patrol connectors
No results.