Back to the list of connectors

Fujitsu-Siemens Management Blade (FSC BX Blade Servers)

Description

This connector enables hardware monitoring through the Fujitsu-Siemens Management Blade SNMP Agent which supports the Fujitsu-Siemens Blade servers (BX300, BX600, etc.). Needs to run remotely.

Connector file name: MS_HW_FujitsuSiemensBlade.hdf

Target

Typical platform: Fujitsu-Siemens BX Blade

Operating system: Out-of-Band

Prerequisites

Leverages: Fujitsu-Siemens Management Blade

Technology and protocols: SNMP

This connector is not available for the local host (it is applicable to remote hosts only).

Connector Activation Criteria

The Fujitsu-Siemens Management Blade (FSC BX Blade Servers) connector will be automatically activated, and its status will be reported as OK if all the below criteria are met:

  • An SNMP Get on the OID 1.3.6.1.4.1.7244.1.1.1.1.12.1.0 must return a value that matches with the 3 regular expression

Monitors

Object Type Collected Parameters Discovered Properties
Enclosure (MS_HW_ENCLOSURE)
  • Model
  • Type
  • Vendor
Blade (MS_HW_BLADE)
  • Status
  • Blade Model
Fan (MS_HW_FAN)
  • Speed
  • Status
  • Fan Type/Location
Power Supply (MS_HW_POWERSUPPLY)
  • Status
  • Power Supply Type
Temperature Sensor (MS_HW_TEMPERATURE)
  • Temperature
  • Alarm Threshold
  • Sensor Type/Location
  • Warning Threshold
Keywords:
hardware hdf patrol connectors
No results.